Skip to content
Wort&Keg

Roundup

The Best Unitanks for Homebrewing

A unitank ferments, carbonates and serves from one vessel. What separates them is how they handle pressure and how they get cold.

ByBrijon M.

Last updated

How we pick

The short answer

The Ss Brewtech Unitank is the best homebrew unitank: a pressure-rated vessel with a glycol jacket, carb stone port and tri-clamp fittings that genuinely replaces a fermenter and a brite tank. The Spike CF5 is the better buy if you do not already run glycol, and the KegMenter is the cheap way in.

Jacketed stainless unitank fermenter

DisclosureWe earn a commission on qualifying purchases made through links on this page, at no extra cost to you. It does not change what we recommend or how we rank it -- here is how we pick and here is the full disclosure.

At a glance

Quick picks

#ProductBest forPrice
1
Jacketed stainless unitank fermenter

Best overall

Ss Brewtech Unitank

This is the vessel the category is named after: pressure rated with a relief valve, a glycol jacket so the tank is its own cold room, tri-clamp ports, a thermowell and a carb stone port. Ferment under pressure, carbonate through the stone, then serve from the same tank -- no transfer, no oxygen pickup, no second vessel to clean.

Brewers who already run glycol, or are committing to it
2
Welded stainless conical fermenter with tri-clamp ports

Best without glycol

Spike Brewing CF5 Conical Fermenter

Welded 304 stainless with no crevices, tri-clamp ports throughout, a full cone with a dump valve and a pressure rating that covers spunding and closed transfer. A cooling coil is available as a factory option, which is how you get jacket-style temperature control without committing to a glycol loop on day one.

Five gallon brewers who want welded stainless and pressure
3
Stainless pressure fermenter vessel with a gas post

Best budget route in

KegLand KegMenter Fermenter 30 L

A 304 stainless keg-style body rated for pressure fermentation and transfer, with ball lock posts so it talks to gear you already own. For the price of a few corny kegs you get the part of the unitank idea that matters most: ferment under pressure and push the finished beer out under its own gas.

Brewers who want pressure and closed transfer before stainless cones
4
Clear conical pressure fermenter with a collection butt

Best cone for the money

FermZilla Tri-Conical 27 L

A clear PET cone with a detachable collection butt, a 3 inch tri-clover ferrule molded into the tank and a tri-clover dump valve. It does the one thing the stainless tanks charge most for -- a real cone you can dump and harvest from -- at a fraction of the outlay, and it takes pressure with the kit.

Yeast harvesting and seeing what the fermentation is doing

Prices are checked on Amazon when you click. We never print a number we cannot verify.

Manufacturer-published specifications

VesselMaterialPressureCoolingCone
Ss Brewtech UnitankStainlessRated, with PRVGlycol jacketCone, carb stone port
Spike CF5Welded 304 stainlessRated for transferOptional cooling coilFull cone, dump valve
KegLand KegMenter304 stainlessRatedChamber or wrap onlyFlat bottom
FermZilla Tri-ConicalClear PETWith pressure kitChamber or wrap onlyCollection butt

An orange rule marks the better of the two on that row.

Definition

What makes a tank a unitank

A unitank is a single vessel that does three jobs a traditional setup splits across three: primary fermentation, conditioning and carbonation, and serving. To do all three it has to be pressure rated, it has to be able to hold a cold temperature on its own or with help, and it has to let you get beer out without letting air in. Everything else is detail.

The reason brewers want one is oxygen. Every transfer between vessels is an opportunity to pick up the dissolved oxygen that turns a bright hoppy beer into wet cardboard inside a month. Fermenting, carbonating and serving from one tank removes those transfers entirely. If you are not ready for a unitank, the same benefit is available one step down by doing a closed transfer to keg.

The criteria

Pressure, cooling, cone, ports

Pressure rating. Non-negotiable. A pressure rating is what lets you spund the tank so the beer carbonates on its own CO2, and it is what lets you push finished beer out under gas instead of pumping or siphoning it. A vessel that is not rated is a fermenter, however nice the stainless is.

How it gets cold. This is the dividing line in this roundup. A glycol jacket makes the tank its own temperature-controlled room and lets you run it anywhere, but it requires a chiller, lines and a controller. A cooling coil does a similar job with a smaller commitment. Everything else needs a chamber or a wrap, which means buying space as well as cooling -- glycol chiller vs fermentation fridge is the comparison that decides it.

The cone. A cone concentrates trub and yeast at a dump valve, which is how you pull a clean yeast crop and how you keep the beer off its own sediment during conditioning. Flat bottomed pressure vessels are cheaper and perfectly good fermenters, but they give that up.

Ports. A thermowell for honest liquid temperature, a carb stone port if you want to force carbonate in the tank rather than spund, and tri-clamp connections so the whole thing comes apart to be cleaned. Ports are the spec that separates a tank you can serve from and one you merely ferment in.

The honest cost

The tank is not the purchase

Every unitank setup has a second invoice. For a jacketed tank it is the glycol chiller, the lines, the propylene glycol itself, a solenoid and a controller -- a purchase of comparable seriousness to the tank. For a coil-equipped tank it is a smaller chiller or a recirculating ice bath. For a chamber-cooled pressure vessel it is the chamber, and the floor space the chamber occupies.

Size the cooling for the tank you will own next rather than the one you are buying now. Chillers are expensive to replace and cheap to oversize slightly, and the second fermenter always arrives sooner than planned - what size glycol chiller works through the capacity math. The same logic applies to ceiling height: a half barrel tank with a dump valve underneath it needs clearance to get a bucket under the cone.

How we picked

The basis for these four

Capacities, pressure ratings, materials and port configurations are the manufacturers’ published figures as listed by the retailers cited below, and each vessel was confirmed as currently sold before it was written up. We have not run all four of these tanks side by side and do not claim to; the judgments here are about what each configuration can and cannot do, which is a question the specifications answer honestly. Our full read of the flagship is in the Ss Brewtech Unitank review. See how we pick.

The picks, in order

Every pick in detail

Jacketed stainless unitank fermenter

#1

Best overall

Prosumer tier

Ss Brewtech Unitank

Ss Brewtech

This is the vessel the category is named after: pressure rated with a relief valve, a glycol jacket so the tank is its own cold room, tri-clamp ports, a thermowell and a carb stone port. Ferment under pressure, carbonate through the stone, then serve from the same tank -- no transfer, no oxygen pickup, no second vessel to clean.

Spec sheet

Capacity
Half barrel (0.5 bbl) and larger
Pressure
Rated vessel with a pressure relief valve
Cooling
Glycol jacket, no chamber needed
Ports
Tri-clamp, thermowell, carb stone port
Process
Ferment, carbonate and serve from one vessel
Footprint
Needs floor space and a glycol loop

What it is not good at

The jacket is inert without a glycol chiller, so this is never a standalone purchase. Floor space and ceiling height for a half barrel tank are real constraints in a home brewery, and the full setup costs more than most people's entire brewing system.

Who it is for

Brewers who already run glycol, or are committing to it

Welded stainless conical fermenter with tri-clamp ports

#2

Best without glycol

Prosumer tier

Spike Brewing CF5 Conical Fermenter

Spike Brewing

Welded 304 stainless with no crevices, tri-clamp ports throughout, a full cone with a dump valve and a pressure rating that covers spunding and closed transfer. A cooling coil is available as a factory option, which is how you get jacket-style temperature control without committing to a glycol loop on day one.

Spec sheet

Capacity
8 gal / 30 L (5 gal batch)
Material
Welded 304 stainless, no crevices
Pressure
Rated for pressure transfer and spunding
Ports
Tri-clamp throughout
Cone
Full cone with a dump valve
Options
Cooling coil, thermowell, CIP arm

What it is not good at

It is a fermenter that can serve, not a serving tank -- there is no carb stone port in the base configuration, so carbonation is set by spunding or done in the keg. Options add up quickly once you start specifying coil, thermowell and CIP arm.

Who it is for

Five gallon brewers who want welded stainless and pressure

Stainless pressure fermenter vessel with a gas post

#3

Best budget route in

Mid tier

KegLand KegMenter Fermenter 30 L

KegLand

A 304 stainless keg-style body rated for pressure fermentation and transfer, with ball lock posts so it talks to gear you already own. For the price of a few corny kegs you get the part of the unitank idea that matters most: ferment under pressure and push the finished beer out under its own gas.

Spec sheet

Capacity
30 L / 7.9 gal (also 40 L and 58 L)
Material
304 stainless, keg-style body
Pressure
Rated for pressure fermentation and transfer
Shape
Flat bottom -- no trub cone
Ports
Ball lock posts, floating dip tube option
Opacity
Opaque -- you cannot see the krausen

What it is not good at

Flat bottom, so there is no trub cone and no yeast dump -- harvesting means opening the lid. The body is opaque, so you cannot watch the krausen, and it does not take a glycol jacket.

Who it is for

Brewers who want pressure and closed transfer before stainless cones

Clear conical pressure fermenter with a collection butt

#4

Best cone for the money

Mid tier

FermZilla Tri-Conical 27 L

KegLand

A clear PET cone with a detachable collection butt, a 3 inch tri-clover ferrule molded into the tank and a tri-clover dump valve. It does the one thing the stainless tanks charge most for -- a real cone you can dump and harvest from -- at a fraction of the outlay, and it takes pressure with the kit.

Spec sheet

Capacity
27 L / 7.1 gal (also 55 L)
Cone
Detachable collection butt for yeast harvest
Fitting
3 in tri-clover ferrule molded into the tank
Valve
Redesigned tri-clover dump valve
Material
Clear PET body
Pressure
Yes, with the pressure kit

What it is not good at

PET is not stainless: it scratches, it has a service life, and it will not take a glycol jacket. Pressure capability requires the separate kit rather than coming in the box.

Who it is for

Yeast harvesting and seeing what the fermentation is doing

FAQ

Questions brewers actually ask

What is a unitank in homebrewing?

A unitank is a single pressure-rated vessel that ferments, conditions and carbonates, and serves the finished beer. It replaces the fermenter plus brite tank pair used in commercial breweries, and for homebrewers it removes the transfers where beer picks up oxygen.

Do you need a glycol chiller for a unitank?

For a jacketed tank such as the Ss Brewtech Unitank, yes -- the jacket does nothing without a chiller circulating cold glycol through it. Tanks with an optional cooling coil can run on a smaller chiller, and flat-bottom pressure vessels such as the KegMenter use a chamber or a heat wrap instead.

Can you serve beer directly from a unitank?

Yes, that is the point of one. Once the beer is carbonated in the tank, you dispense from the liquid port under the same gas pressure that carbonated it. You need the tank cold, a balanced line and the right dispense pressure, exactly as you would from a keg.

Is a unitank worth it for a five gallon brewer?

Often not in its full jacketed form. At five gallons the cost of a tank plus a glycol chiller is hard to justify against a pressure-capable conical and a fermentation chamber. The parts of the idea worth having at that scale are the pressure rating and closed transfer, which cheaper vessels provide.

What is the difference between a unitank and a conical fermenter?

Every unitank is a conical, but not every conical is a unitank. The difference is the pressure rating and the ability to carbonate and serve: a plain conical ferments and lets you dump trub, while a unitank is rated to hold carbonation and dispense the finished beer from the same vessel.

Sources

Read next

More on fermenters

Welded stainless conical fermenter with tri-clamp ports

Comparison

Spike CF5 vs Ss Brewtech Unitank

The welded five gallon conical against the jacketed unitank, compared on cooling, pressure, cone and the gear each one needs around it.

Stainless pressure fermenter vessel with a gas post

Guide

Spunding Valve Explained

What a spunding valve does, how to choose the pressure setting, and which fermenters can take one safely.

View all Fermenters →