Comparison
Spike CF5 vs Ss Brewtech Unitank
Two prosumer stainless vessels that look similar on a shelf and ask for very different breweries around them.
The short answer
Buy the Spike CF5 if you want welded stainless, a full cone and pressure transfer without committing to a glycol loop. Buy the Ss Brewtech Unitank if you already run glycol or will: the jacket and carb stone port let it ferment, carbonate and serve as one vessel.

DisclosureWe earn a commission on qualifying purchases made through links on this page, at no extra cost to you. It does not change what we recommend or how we rank it -- here is how we pick and here is the full disclosure.
Manufacturer-published specifications
| Spec | Spike CF5 | Ss Brewtech Unitank |
|---|---|---|
| Batch scale | 8 gal vessel, 5 gal batch | Half barrel and larger |
| Construction | Welded 304, no crevices | Stainless, jacketed |
| Pressure | Rated for transfer and spunding | Rated vessel with PRV |
| Cooling | Optional cooling coil | Glycol jacket |
| Carbonation | Spund, or carbonate in keg | Carb stone port in the tank |
| Cone | Full cone with dump valve | Cone with dump valve |
| Needs alongside | Chamber, or a small chiller | Glycol chiller and loop |
An orange rule marks the better of the two on that row.
The real question
This is a decision about your brewery, not the tank
Both of these are well made stainless vessels from manufacturers that homebrewers trust, and on specifications alone the choice looks like a size question. It is not. The question these two actually ask is whether your brewery has -- or is about to have -- a glycol loop in it. Answer that and the tank chooses itself.
The Unitank is built around its jacket. The jacket is the reason it needs no fermentation chamber, the reason it can hold a lager temperature in a warm garage, and the reason it costs what it costs. Without a chiller circulating cold glycol through it, the jacket is an empty cavity and you have bought an expensive conical.
The CF5 is built around welded stainless and tri-clamp serviceability, with cooling offered as an option rather than assumed. It is designed to sit in a chamber, or to run a coil from a modest chiller, and that makes it the realistic stainless step for a five gallon brewer who is not ready to plumb a glycol system.
Cooling
Jacket versus coil versus chamber
A glycol jacket wraps the vessel and pulls heat through the tank wall. It is the most responsive and the most capable option, holds cold crash temperatures without a chamber, and scales to multiple tanks on one chiller. It is also a system: chiller, reservoir, pump, insulated lines, propylene glycol, solenoid and controller.
A cooling coil puts the cold inside the beer instead of around it. It is less elegant, it is a surface to clean, and it works -- a coil on a modest chiller holds fermentation temperature on a five gallon batch perfectly well. It is the pragmatic middle, and it is why the CF5 can be the right answer for a brewer who will never own a glycol plant.
A chamber cools the air around the vessel. It is the cheapest temperature control in the hobby and the slowest to respond, and it costs floor space rather than money. Both tanks here work in a chamber if one is big enough to hold them, which for a half barrel unitank is a real qualification. The trade-offs are set out in glycol chiller vs fermentation fridge.
Carbonation
A carb stone port is what makes a tank a brite tank
This is the specification difference that decides whether a vessel can end the process or only start it. The Unitank has a carb stone port: you drop a stone in, run CO2 through it and carbonate the beer in the tank in hours, then dispense from the same vessel. That is a brite tank function, and it is what collapses three vessels into one.
The CF5 carbonates the other way, by spunding -- closing the vessel near the end of fermentation and letting the beer carbonate itself on its own CO2. That produces excellent carbonation and costs nothing, but it has to be planned and timed; see spunding valve explained for how the pressure target is set. Otherwise you carbonate in the keg after a closed transfer, which is what most homebrewers do anyway.
Neither approach is wrong. What matters is whether the beer leaves the fermenter without meeting air, and both vessels do that, because both are pressure rated. The Unitank simply lets you delay that transfer until the glass.
Verdict
Which one belongs in your brewery
Our verdict
Which one should you buy?
Buy this if you brew five gallons
Spike Brewing CF5 Conical Fermenter
- Welded 304 stainless with tri-clamp ports throughout
- Full cone with a dump valve for trub and yeast
- Pressure rated for spunding and closed transfer
- Optional cooling coil instead of a glycol loop
Buy this if you run glycol
Ss Brewtech Unitank
- Glycol jacket -- no fermentation chamber needed
- Carb stone port carbonates in the tank
- Serve the finished beer from the same vessel
- Scales with a chiller sized for more than one tank
If you are still deciding whether cone-bottom fermentation suits the way you brew at all, there is a cheaper experiment. A clear tri-conical with a collection butt answers the question for a fraction of either price, and the unitank roundup places all of these against each other. The one genuinely bad outcome here is buying a jacketed tank and discovering the glycol budget afterwards.
What we recommend
The products on this page

Prosumer tier
Spike Brewing CF5 Conical Fermenter
Spike Brewing
Welded 304 stainless with no crevices, tri-clamp ports throughout, a full cone with a dump valve and a pressure rating that covers spunding and closed transfer. The optional cooling coil is the part that matters in this comparison: it is temperature control inside the vessel without a jacket and the loop a jacket implies.
Spec sheet
- Capacity
- 8 gal / 30 L (5 gal batch)
- Material
- Welded 304 stainless, no crevices
- Pressure
- Rated for pressure transfer and spunding
- Ports
- Tri-clamp throughout
- Cone
- Full cone with a dump valve
- Options
- Cooling coil, thermowell, CIP arm
What it is not good at
No carb stone port in the base configuration, so carbonation happens by spunding or in the keg. Options -- coil, thermowell, CIP arm -- are individually reasonable and collectively significant.
Who it is for
Five gallon brewers who want stainless and pressure, not a glycol loop

Prosumer tier
Ss Brewtech Unitank
Ss Brewtech
Pressure rated with a relief valve, glycol jacketed, with a thermowell and a carb stone port. It is the only vessel of the two that genuinely replaces a brite tank: ferment under pressure, carbonate through the stone, serve from the same tank without a transfer.
Spec sheet
- Capacity
- Half barrel (0.5 bbl) and larger
- Pressure
- Rated vessel with a pressure relief valve
- Cooling
- Glycol jacket, no chamber needed
- Ports
- Tri-clamp, thermowell, carb stone port
- Process
- Ferment, carbonate and serve from one vessel
- Footprint
- Needs floor space and a glycol loop
What it is not good at
The jacket is inert without a chiller, so the real purchase is tank plus glycol plant. The footprint and the clearance needed under the cone are serious in a home brewery.
Who it is for
Brewers running glycol at half barrel scale

Mid tier
FermZilla Tri-Conical 27 L
KegLand
A clear PET cone with a detachable collection butt and a tri-clover dump valve, pressure-capable with the kit. The cheap way to find out whether you actually use a dump valve before spending stainless money on one.
Spec sheet
- Capacity
- 27 L / 7.1 gal (also 55 L)
- Cone
- Detachable collection butt for yeast harvest
- Fitting
- 3 in tri-clover ferrule molded into the tank
- Valve
- Redesigned tri-clover dump valve
- Material
- Clear PET body
- Pressure
- Yes, with the pressure kit
What it is not good at
PET scratches and has a service life, it takes no jacket, and the pressure kit is a separate purchase.
Who it is for
Deciding whether cone-bottom fermentation suits you at all
FAQ
Questions brewers actually ask
Is the Spike CF5 a unitank?
It has the pressure rating and the cone, but not the carb stone port or the glycol jacket of a full unitank in its base configuration. It ferments under pressure and closed-transfers to a keg; carbonating and serving from the vessel itself is where the Ss Brewtech Unitank goes further.
Can you use the Ss Brewtech Unitank without glycol?
You can ferment in it, but the jacket does nothing without a chiller circulating cold glycol, so you would be relying on ambient temperature or a chamber large enough to hold it. Buying the tank without planning the chiller is the most common expensive mistake in this category.
Which is easier to clean, the CF5 or the Unitank?
Both are designed for it. The CF5's welded construction has no crevices and its tri-clamp ports come apart completely; the Unitank uses tri-clamp fittings and takes a CIP arm. The practical difference is size -- a half barrel tank is harder to move to a sink, which is why both are usually cleaned in place.
Do you need a cooling coil on a Spike CF5?
Only if the vessel is not going into a temperature-controlled chamber. The coil is how you get in-vessel cooling without a jacket, and it runs from a smaller chiller than a jacketed tank needs. If you already own a fermentation chamber that fits the CF5, you can skip it.
Which one is better for lagers?
The Unitank, if you have the glycol for it -- jacket cooling holds lager temperatures and a cold crash without a chamber, and a carb stone shortens conditioning. A CF5 with a coil or in a chamber brews excellent lagers too; it just asks more of the room around it.
Sources
Read next
More on fermenters

Roundup
The Best Unitanks for Homebrewing
One-vessel fermenters compared on pressure rating, cooling method, cone design and what each one needs to buy alongside it.

Review
Ss Brewtech Unitank Review
The jacketed pressure unitank reviewed, including the glycol loop you have to buy with it.

Review
Spike Brewing CF5 Conical Review
The buy-once welded conical, and the cooling problem it creates.

Guide
Spunding Valve Explained
What a spunding valve does, how to choose the pressure setting, and which fermenters can take one safely.

Guide
Glycol Chiller Installation, Step by Step
Siting, plumbing, glycol mixing and per-vessel control for a homebrew glycol loop.

Roundup
The Best Conical Fermenters
Stainless, plastic and pressure-capable conicals compared, with chamber-fit warnings.