Skip to content
Wort&Keg

Comparison

NukaTap vs Perlick: Which Forward-Sealing Faucet?

Both keep beer out of the faucet body between pours. One swaps spouts and costs less; the other is the bar-trade part you rebuild instead of replace.

ByBrijon M.

Last updated

How we pick

The short answer

Buy the NukaTap if you want interchangeable spouts -- stout, growler filler -- and the lower price, which is most homebrewers. Buy the Perlick 630SS if you want the commercial-bar standard with a parts and rebuild-kit supply chain behind it and a fixed spout you will never need to change. Both are 304 stainless and both are genuinely forward sealing, so there is no wrong answer here, only a fit.

Row of stainless forward-sealing beer faucets on a draft tower

DisclosureWe earn a commission on qualifying purchases made through links on this page, at no extra cost to you. It does not change what we recommend or how we rank it -- here is how we pick and here is the full disclosure.

NukaTap vs Perlick 630SS at a glance

NukaTap stainlessPerlick 630SS
SealingForward sealing, TPV shuttleForward sealing, ball and floating O-ring
Body materialStainless body and leverFood-grade 304 stainless
SpoutThreaded, interchangeableFixed
Stout spoutScrews onSeparate stout faucet
Growler fillingGrowler spout attachmentGT600 tube on the 650SS
Flow control versionFlow Control Gen 2650SS with built-in compensator
Shank fitStated compatible with Intertap shanksFits all North American shanks
Parts channelHomebrew retailCommercial bar trade
Price bracketLowerHigher

Which one wins each decision

NukaTapPerlick 630SS
Purchase priceLowerHigher
Spout flexibilityInterchangeableFixed
Nitro from the same faucetSpout swapSecond faucet
Rebuild kit availabilityHomebrew channelBar trade, everywhere
Shank compatibility documentedReseller claimManufacturer statement
Finish optionsStainless, painted black, MiniStainless or chrome over brass
Commercial credibilityNSF on the stainless modelThe bar-trade default
Flow control optionFlow Control Gen 2650SS compensator

An orange rule marks the better of the two on that row.

The shared part

Forward sealing is the thing they agree on

A conventional rear-sealing faucet seals at the back of the body. The beer in front of that seal drains away between pours, air gets in, and what is left dries on the internals. That is the film you find when you finally pull a faucet apart, and it is the reason rear-sealing faucets want a daily soak and eventually stick.

A forward-sealing faucet seals at the front, right behind the spout. The body stays full of beer, no air gets in, nothing dries. Perlick describes its implementation as a ball and floating O-ring design that eliminates the need for a valve shaft, and says the result is cleaner dispensing without stuck handle levers or mold and bacteria building up in the faucet body. The NukaTap achieves the same thing with a TPV shuttle running on EPDM O-rings.

Both work. If you are coming from a chrome rear-sealing faucet, the upgrade you feel is from either of these, not from choosing correctly between them. The decision below is about everything around the seal.

Spouts

The one structural difference

The NukaTap’s spout threads off. That single feature means one faucet can be a standard pour today, a stout faucet with a restrictor spout next month, and a growler filler when you need one. If you run a small number of taps and pour a range of styles, that flexibility is worth more than anything else in this comparison.

The Perlick 630SS has a fixed spout. Perlick’s answer to growler filling is the 650SS flow control model paired with its GT600 growler filler tube, and its answer to nitro is a different faucet. That is the commercial logic: a bar specifies one faucet per job and does not reconfigure it. It is a worse fit for a four-tap keezer where the lineup rotates.

Flow control

Two different ways to slow a pour

Both ranges have a flow control version. The NukaTap Flow Control Gen 2 adds an adjustable restrictor at the faucet, and keeps the same threaded spout. Perlick’s 650SS has a built-in compensator that Perlick describes as letting you fine-tune beer flow at the faucet for hard-to-pour beers, such as kegs running slightly warmer than ideal, and it calls the model ideal for brewery sample flights.

Worth saying plainly: flow control is a correction, not a cure. If every pour foams, the cause is usually the line, the temperature or the pressure, and the fix costs nothing -- beer line length and CO2 regulator settings solve more foam problems than any faucet. Buy flow control because you fill growlers, pour flights, or run a keezer whose kegs sit at different carbonation levels. Do not buy it to paper over an unbalanced system.

Our verdict

Which one should you buy?

Buy the NukaTap if

NukaTap Stainless Forward-Sealing Faucet

  • You want one faucet that can become a stout or growler tap
  • Price per tap matters because you are building three or four
  • You already own Intertap shanks or accessories
  • You like the Mini and duotight ecosystem for tight builds

Buy the Perlick if

Perlick 630SS Stainless Faucet

  • This is a permanent bar you expect to rebuild, not replace
  • You want documented North American shank compatibility
  • Seal kits and spares on any supplier shelf matter to you
  • One faucet, one job, is how you want the tower set up

Parts and longevity

The question to ask about any faucet is what happens in year three

Faucets do not fail dramatically. They develop a drip, the lever gets stiff, an O-ring hardens. What matters is whether a seal kit exists and whether you can get it without a two-week wait.

  • Perlick. It is the faucet commercial accounts specify, so rebuild kits, seats and O-rings are stocked by draft suppliers as a matter of course. Perlick also argues the design has fewer parts than a conventional faucet, which it links to better reliability and fewer service calls. Fewer parts is a real maintenance claim, not marketing.
  • NukaTap. Parts come through the homebrew channel, which is a smaller supply chain but an active one, and the shuttle and O-rings are sold as spares. The practical hedge is that the accessory ecosystem is shared with Intertap, so you are not buying into a single-source part.
  • Both. Whichever you buy, the faucet lasts longer if the lines behind it are cleaned on a schedule. A line cleaning kit and the routine in how to clean a kegerator do more for faucet life than the choice between these two brands.

Finishes

Where the cheaper versions of each stop making sense

Perlick sells the 630PC, a polished chrome finish over a low-lead brass body, as an economical alternative to the stainless 630SS for applications that do not require food-grade stainless. On a home tower, where the faucet is full of beer between pours by design, we would spend the difference on the stainless version and stop thinking about it.

KegLand’s equivalent step is the matte black Stealth Bomber, which is a painted faucet -- the retailer selling it says so explicitly and advises against it in professional settings. It looks excellent on a black keezer collar. Treat the paint as a finish that will eventually show wear where the lever meets the body, not as a coating that improves anything.

The verdict

What we would actually put on a keezer

For a homebrew keezer or tower with two to four taps, the NukaTap. The spout thread is genuinely useful on a lineup that changes, the price per tap is lower when you are buying several, and the stainless model carries NSF approval, so the material argument against it does not hold.

For a built-in bar that is part of the house, or a setup where you want the same part a draft technician would carry in the van, the Perlick 630SS -- or the 650SS if you fill growlers and pour flights. Neither purchase is a mistake, which is why this comparison does not end in a scoreline. If you would rather see the whole field first, the best beer faucets covers the nitro and flow-control options alongside these two.

What we recommend

The products on this page

Row of chrome and stainless beer faucets on a wall-mounted bar

Best for most homebrewers

Mid tier

NukaTap Stainless Forward-Sealing Faucet

NukaTap (KegLand)

Stainless body and lever, a TPV shuttle on EPDM O-rings, NSF approval on the stainless version, and a threaded modular spout that accepts a stout spout or a growler filler. It is the cheaper of the two at the retailer we checked, and the spout thread is the feature you cannot add to a Perlick later.

Spec sheet

Seal type
Forward sealing -- no beer in the body between pours
Material
304 stainless steel
Spouts
Interchangeable (standard, stout, growler filler)
Shaft
Ball-bearing lever shaft
Thread
Standard US shank thread
Variants
Stainless, matte black, and a Mini duotight version

What it is not good at

KegLand does not publish a shank thread dimension; the compatibility claim that circulates is that it takes Intertap accessories and shanks, which is a reseller statement rather than a spec sheet. The matte black Stealth Bomber finish is painted, and the retailer selling it says so and advises against it in professional settings.

Who it is for

Towers and keezers where one faucet may need to pour a stout next month

Plain stainless forward-sealing beer faucet

Best parts supply

Mid tier

Perlick 630SS Stainless Faucet

Perlick

Food-grade 304 stainless, a patented ball and floating O-ring design that Perlick says eliminates the valve shaft entirely, fewer parts than a conventional faucet, and a company statement that it fits all North American shanks. It is the faucet commercial accounts specify, which is why seal kits and spares are stocked everywhere.

Spec sheet

Seal type
Forward sealing
Flow control
No -- balance the line instead
Material
Stainless steel body and internals
Spout
Fixed
Reputation
The long-running commercial-bar standard
Parts
Rebuild kits widely available

What it is not good at

The spout is fixed. If you want to pour nitro or fill growlers you are buying a second faucet or the separate GT600 filler tube on the flow control model, not swapping a spout. It also costs noticeably more than the NukaTap for what is, on a home tower, the same pour.

Who it is for

A permanent bar you intend to rebuild rather than replace

FAQ

Questions brewers actually ask

Is a NukaTap as good as a Perlick?

For a home draft system, yes. Both are forward sealing, both are stainless in their standard versions, and the NukaTap stainless model carries NSF approval. Perlick's advantages are a documented statement that it fits all North American shanks and a commercial parts channel; the NukaTap's advantage is an interchangeable threaded spout and a lower price.

What does forward sealing actually do?

It seals at the front of the faucet, right behind the spout, so the body stays full of beer and no air gets in between pours. Nothing dries inside, which is what causes sticking levers and the film that builds up in rear-sealing faucets. Perlick implements it with a ball and floating O-ring that removes the valve shaft; NukaTap uses a TPV shuttle on EPDM O-rings.

Does a NukaTap fit a Perlick shank?

The claim that circulates, from KegLand's resellers, is that the NukaTap is compatible with Intertap faucet accessories and shanks, and US draft hardware is broadly standardized. We could not find a published thread dimension from KegLand itself, so if you are swapping a faucet onto an existing tower, check the shank you own before ordering rather than assuming.

Do I need a flow control faucet?

Only for specific jobs: filling growlers, pouring flights, or running kegs at different carbonation levels on one system. If your problem is that every pour foams, the cause is almost always line length, temperature or pressure, and a flow control faucet will mask it rather than fix it. Balance the system first.

Can I pour nitro through either of these?

Not as supplied. A nitro pour needs a restrictor plate, which means either a NukaTap with a stout spout attachment or a dedicated stout faucet alongside your Perlick. It also needs beer gas rather than straight CO2, and a much higher pouring pressure, so the faucet is the last part of that decision rather than the first.

Is the black NukaTap worth it?

Only for looks. The matte black Stealth Bomber is a painted faucet, which the retailer selling it states outright while advising against it in professional settings. It matches a black collar beautifully and the paint will eventually wear where the lever meets the body. The stainless version is the one to buy if you care about the surface rather than the color.

Sources

Read next

More on kegging

Coiled beverage line with a ball lock disconnect and a faucet

Guide

Beer Line Length

Why short line foams, how much resistance each tubing type gives, and the length to cut.

Stainless beer faucet on a draft tower

Comparison

Beer Gas vs CO2 for Nitro

Why a nitro pour needs a nitrogen blend rather than CO2, the pressures involved, and the gear each route requires.

Beer line cleaning kit with pump and cleaning solution

Guide

How to Clean a Kegerator

The line, faucet and cabinet cleaning routines, what to use on each, and how often each one actually needs doing.

View all Kegging →