Roundup
The Best Stir Plates for Yeast Starters
A stir plate turns a sluggish smack pack into a pitchable starter. The spec that decides everything is how much liquid the magnet can keep moving.
The short answer
The KegLand Compact Magnetic Stir Plate is the best stir plate for most homebrewers: it spins a flask up to 5000 ml, has a variable speed dial and a 1 inch bar included, in a 7 by 6 inch footprint. Step up to the Maelstrom if you build starters bigger than a flask.

DisclosureWe earn a commission on qualifying purchases made through links on this page, at no extra cost to you. It does not change what we recommend or how we rank it -- here is how we pick and here is the full disclosure.
At a glance
Quick picks
| # | Product | Best for | Price |
|---|---|---|---|
| 1 | ![]() Best overall Compact Magnetic Stir Plate It handles a flask up to 5000 ml, which is more than a five gallon batch of lager ever asks for, and the speed dial lets you find the point where the vortex is deep but the bar is still coupled to the magnet. At 7 by 6 by 4.25 inches it lives on a shelf rather than claiming counter space, and the 1 inch bar comes in the box so there is nothing else to order. | Anyone building 1 to 2 L starters in an Erlenmeyer flask | |
| 2 | ![]() Best for big starters Maelstrom Stir Plate Five fixed speeds from 480 to 1440 RPM on an 8 by 8.5 inch platform, rated to keep a bar moving in anything from a 1000 ml flask up to a 5 gallon carboy. The scheduling function runs it for up to 48 hours, which matters because the useful part of a starter is the growth phase, not the hours after it. The rare earth magnets are the reason it holds a bar in a vessel that size. | Lager brewers and anyone stepping a starter up in a carboy | |
| 3 | ![]() Best for a small bench Wort Whipper Super Compact Magnetic Stir Plate The same 5000 ml flask rating as the compact plate in a smaller body, with a knob rather than preset speeds. If your brewing gear shares a shelf with everything else in the house, the footprint is the feature -- it takes up about the space of a paperback and still spins a 2 L flask properly. | Brewers short on space who still want a real vortex |
Prices are checked on Amazon when you click. We never print a number we cannot verify.
Retailer-published specifications
| Stir plate | Max vessel | Speed control | Platform | Stir bar |
|---|---|---|---|---|
| KegLand Compact | 5000 ml flask | Variable dial | 4.75 in plate | 1 in included |
| Maelstrom | 5 gal carboy | Five speeds, 480-1440 RPM | 8 x 8.5 in | 50 mm included |
| Wort Whipper | 5000 ml flask | Adjustment knob | Not published | Included |
An orange rule marks the better of the two on that row.
The criteria
Three specs, and the one that actually fails
A stir plate is a motor, a magnet and a speed control. There is not much to get wrong, which is why the failure mode is so consistent: the plate throws the bar. You set the speed too high, or you put too much liquid on too small a plate, the bar decouples from the magnet underneath it and rattles around the bottom of the flask doing nothing. Everything worth comparing here comes back to that.
Magnet strength against vessel size. This is the real spec, and retailers express it as a maximum flask capacity. A plate rated to 5000 ml will hold a bar in a 2 L flask with room to spare. A plate rated for a flask will not hold one in a five gallon carboy, no matter how high you turn it. If you step starters up into a carboy, that rating is the entire purchase decision.
Speed control. A dial lets you creep up on the fastest speed that still holds the bar, which is what you want. Fixed speeds are coarser but repeatable -- the Maelstrom’s five steps between 480 and 1440 RPM can be written in a notebook and hit again next month. An unmarked dial cannot.
Platform and footprint. A larger platform supports a wider vessel and keeps it stable; a smaller one keeps the plate out of the way when you are not using it. There is no right answer here, only the honest trade, and it tracks the capacity rating directly.
Why bother
What the plate actually buys you
Yeast grows faster in a starter that is kept in motion. The vortex keeps the cells suspended and in contact with nutrient, and it drives dissolved carbon dioxide out of solution instead of letting it accumulate around the yeast. A starter left still on the counter still works; a stirred one of the same volume gets you more cells in less time, which is the whole point of making one.
The brewers who notice the difference most are lager brewers and anyone pitching into high gravity wort. Both need pitch rates that a single pack of yeast does not supply, and both pay for an underpitch in sulfur, slow starts and a fermentation that stalls short of terminal gravity. If you are fermenting cool and under pressure in a modern vessel, the pitch rate matters more rather than less -- see how to pressure ferment a lager for where the starter sits in that process.
Sizing
Flask on a plate, or carboy on a plate
Most homebrewers build 1 to 2 L starters in a 2000 ml or 5000 ml Erlenmeyer flask. The flask shape is doing real work: the sloped sides keep the vortex centered and the narrow neck takes a foil cap that breathes without inviting anything in. For that job every plate on this page is enough, and the compact models are the sensible buy.
Step-up starters are the other case. If you are pitching a big lager or propagating a house strain, you build a small starter, let it finish, and step it into a larger volume -- which eventually means a gallon jug or a carboy on the plate. That is a different magnet problem, and it is the only reason to buy the largest plate here. Be honest about which brewer you are before spending the difference.
- Pick the vessel first. The plate serves the vessel, not the other way round.
- Match the bar to the vessel. A 1 inch bar suits a flask; a 50 mm bar is for the larger platforms and bigger volumes.
- Find the speed that holds. Turn it up until the vortex is deep, then back off until the bar is quiet and centered.
- Stop at high krausen or chill it. A plate with a 48 hour timer makes that easy to schedule; without one, set your own reminder.
How we picked
The basis for these three
Capacity, speed, platform and stir bar figures are the published specifications on the US retailer listings cited below, and every plate in the picks was confirmed as currently purchasable before it was written up. Where a retailer does not publish a dimension or a power figure -- as with the Wort Whipper -- we say so rather than estimating it. We have not run these three plates against each other on identical starters and do not claim to; the judgments about bar throw and vortex depth reflect documented owner experience and the physics the ratings describe. See how we pick.
The picks, in order
Every pick in detail

#1
Best overall
Entry tier
Compact Magnetic Stir Plate
KegLand
It handles a flask up to 5000 ml, which is more than a five gallon batch of lager ever asks for, and the speed dial lets you find the point where the vortex is deep but the bar is still coupled to the magnet. At 7 by 6 by 4.25 inches it lives on a shelf rather than claiming counter space, and the 1 inch bar comes in the box so there is nothing else to order.
Spec sheet
- Flask capacity
- Up to 5000 ml
- Speed control
- Adjustable speed dial, on/off switch
- Dimensions
- 7 in L x 6 in W x 4.25 in H
- Plate diameter
- 4.75 in
- Stir bar
- 1 in bar included
- Cord
- 4 ft
What it is not good at
The 4.75 inch plate is sized for a flask, not a carboy. Put a gallon jug of starter wort on it and the magnet loses the bar. The dial is also unmarked, so repeatable speeds are a matter of memory rather than a setting.
Who it is for
Anyone building 1 to 2 L starters in an Erlenmeyer flask

#2
Best for big starters
Prosumer tier
Maelstrom Stir Plate
Maelstrom
Five fixed speeds from 480 to 1440 RPM on an 8 by 8.5 inch platform, rated to keep a bar moving in anything from a 1000 ml flask up to a 5 gallon carboy. The scheduling function runs it for up to 48 hours, which matters because the useful part of a starter is the growth phase, not the hours after it. The rare earth magnets are the reason it holds a bar in a vessel that size.
Spec sheet
- Speed range
- 480-1440 RPM across five distinct speeds
- Platform
- 8 in W x 8.5 in L stirring surface
- Max vessel
- 1000 ml flask up to a 5 gallon carboy
- Scheduling
- Programmable for up to 48 hours
- Stir bar
- 50 mm bar and a bar removal tool included
- Magnets
- Rare earth -- holds the bar at speed
What it is not good at
It costs several times what a compact plate does, and the platform is big enough to be awkward on a crowded bench. If every starter you make fits in a 2 L flask, you are paying for capacity you will never use.
Who it is for
Lager brewers and anyone stepping a starter up in a carboy

#3
Best for a small bench
Entry tier
Wort Whipper Super Compact Magnetic Stir Plate
KegLand
The same 5000 ml flask rating as the compact plate in a smaller body, with a knob rather than preset speeds. If your brewing gear shares a shelf with everything else in the house, the footprint is the feature -- it takes up about the space of a paperback and still spins a 2 L flask properly.
Spec sheet
- Flask capacity
- Erlenmeyer flasks up to 5000 ml
- Speed control
- Adjustment knob sets stir bar speed
- Stir bar
- Included
- Form factor
- Super compact -- the smallest footprint here
- Dimensions
- Not published by the retailer
- Power
- Not published by the retailer
What it is not good at
The retailer does not publish dimensions or a power figure, so you are buying on the capacity claim alone. A smaller body also means a smaller base, and a 5 L flask sitting on it needs a level, stable surface or it walks.
Who it is for
Brewers short on space who still want a real vortex
FAQ
Questions brewers actually ask
Do you really need a stir plate for a yeast starter?
No. A starter shaken periodically on the counter still grows yeast. A stir plate keeps the cells suspended and drives off dissolved carbon dioxide continuously, so it grows more cells in the same time and volume. Lager brewers and anyone pitching into high gravity wort get the most out of one.
What size stir plate do I need?
Match it to your largest vessel, not your usual one. A plate rated to a 5000 ml flask covers any starter that fits in a flask, which is almost all of them. Only step up to a carboy-rated plate like the Maelstrom if you step starters up into gallon jugs or carboys.
Why does my stir bar rattle instead of spinning?
The bar has decoupled from the magnet. That happens when the speed is too high, the vessel is too large or too full for the plate's rating, or the vessel is not centered on the plate. Turn the speed down until the bar re-centers, then creep back up. Turning it up makes it worse, not better.
How long should a yeast starter run on a stir plate?
Most starters have done their useful growing within 12 to 24 hours, and 48 hours is the outside of it. A plate with a programmable timer, such as the Maelstrom's 48 hour scheduling, lets you set that rather than remember it. After that, chill the starter if you plan to decant it.
Can you use a stir plate with a carboy instead of a flask?
Only with a plate rated for it. The magnet has to reach through the glass and the liquid above it, which is why carboy-capable plates such as the Maelstrom use rare earth magnets and a larger platform. A flask is still the better starter vessel: sloped sides center the vortex and the narrow neck takes a foil cap.
Sources
Read next
More on brew day gear

Guide
How to Make a Yeast Starter
The 1.040 starter wort ratio, stir plate timing, when to decant and how to tell the starter actually worked.

Guide
How to Harvest Yeast From a Conical
Dump the trub, collect the clean crop, store it properly -- how to repitch from a cone without propagating a problem.

Roundup
The Best Homebrew Cleaners and Sanitizers
The two chemicals that do the work, plus the low-foam and draft-line gear worth adding.

Guide
Lager Fermentation Schedule
Primary temperature, the diacetyl rest, the crash and the lagering period -- with the gravity triggers for each step.

Roundup
The Best pH Meters for Brewing
Brewing pH meters compared on accuracy, temperature compensation, probe replaceability and the real cost of ownership.

Roundup
The Best Grain Mills for Homebrewing
Grain mills compared on rollers, gap adjustment and build quality.