Skip to content
Wort&Keg

Comparison

Grainfather G30 vs G40

Same control app, same recirculating single-vessel idea, ten liters apart. The difference only matters at the top of a grain bill.

ByBrijon M.

Last updated

How we pick

The short answer

Buy the Grainfather G30 if you brew five gallon batches: 30 L capacity, about 23 L into the fermenter, and a smaller footprint. Buy the G40 if you want six to eight gallon batches or big grain bills -- 40 L capacity, roughly 30 L into the fermenter and a counterflow chiller included.

Compact electric brewing system in a home kitchen

DisclosureWe earn a commission on qualifying purchases made through links on this page, at no extra cost to you. It does not change what we recommend or how we rank it -- here is how we pick and here is the full disclosure.

Manufacturer-published specifications

SpecGrainfather G30Grainfather G40
Vessel capacity30 L / 8 gal40 L / 10.5 gal
Into the fermenter~23 L / 6 gal~30 L / 8 gal
Grain capacitySuits five gallon grain bills~9 kg / 20 lb
ControlApp-connectedBluetooth app, programmable step mash
PumpRecirculation pumpVariable-speed recirculation pump
ChillerCounterflow chillerCounterflow chiller included
Footprint and weightSmaller, easier to storeLarger, heavier to move

An orange rule marks the better of the two on that row.

The short version

This is a batch size decision, not a quality one

Both systems are the same machine in two sizes. Single vessel, recirculating mash, app control, counterflow chilling. Neither makes better beer than the other, neither is better built, and the upgrade path is identical. What differs is how much wort comes out of the other end, and how much grain you can get in before the basket becomes the limit.

The G30 produces about 23 L into the fermenter -- a five gallon batch with the losses accounted for. The G40 produces about 30 L, which is a comfortable six gallons or a tight eight. If every recipe you brew is five gallons and always will be, the G30 is the correct purchase and the G40 is capacity you pay to store.

Grain bills

Where the smaller system actually runs out

Capacity in liters is the headline, but the real constraint on a single-vessel system is the grain basket. A standard gravity five gallon ale uses a modest grain bill that either machine swallows without comment. A 1.080 imperial stout does not: the grain volume rises faster than the liquid volume, and on a smaller system you reach a point where the mash is crowded, recirculation slows and efficiency drops.

The G40’s roughly 9 kg grain capacity is the headroom that keeps big beers straightforward. If you have ever thinned a recipe to make it fit, or brewed a big beer in two halves, that is the specification talking. If you have not, it is a feature you are unlikely to use -- and crowding is not the only efficiency factor worth attending to, as how to improve mash efficiency sets out.

Practicalities

Footprint, weight and the kitchen question

A 40 L vessel full of wort is heavy, and it is tall. Both facts matter in a kitchen: tall systems can foul extractor hoods and upper cabinets, and a heavy full vessel is awkward to drain, lift or move when the brew day finishes. If your brewery is a corner of a kitchen that has to be a kitchen again by dinner, the smaller machine is the more pleasant one to live with.

Storage is the other half of that. A G30 lives in a cupboard plausibly; a G40 is a piece of equipment that lives where you put it. Neither is a reason to buy the wrong capacity, but both are reasons not to buy capacity you do not need.

Power is worth checking in the same breath. Mains voltage differs by region and so do the systems sold into them, so confirm the configuration of the unit you are buying -- the same question that decides the 240V systems against the 120V ones.

Verdict

Which Grainfather belongs in your brewery

Our verdict

Which one should you buy?

Buy this for five gallon batches

Grainfather G30

  • About 23 L into the fermenter -- a standard five gallon batch
  • Smaller footprint, easier to store and move
  • Same app-connected recirculating process as the G40
  • Cheaper, and nothing is wasted on unused capacity

Buy this for bigger beers

Grainfather G40

  • About 30 L into the fermenter -- six to eight gallons
  • Roughly 9 kg grain capacity for high gravity recipes
  • Variable-speed recirculation pump
  • Counterflow chiller included

If the choice is genuinely close, buy for the batch size you brew most often rather than the one you aspire to. A system used at the top of its range every time will frustrate you; one used at half capacity every time merely cost more than it needed to. And if the Grainfather ecosystem itself is not the draw, the Grainfather versus BrewZilla comparison is the next question to settle.

What we recommend

The products on this page

Compact electric brewing system in a home kitchen

Mid tier

Grainfather G30

Grainfather

30 L of capacity producing around 23 L into the fermenter, which is a standard five gallon batch with sensible headroom. App-connected control with the same recirculating single-vessel process as its bigger sibling, in a vessel one person can move and store.

Spec sheet

Capacity
30 L / 8 gal
Max batch
~23 L / 6 gal
Control
App-connected

What it is not good at

Big grain bills are where it runs out -- a high gravity recipe fills the basket before it fills the kettle. If your brewing is drifting towards imperial stouts, you will meet that ceiling.

Who it is for

Five gallon batches in a kitchen or a small brewery

All-grain electric brewing system with recirculation tubing

Prosumer tier

Grainfather G40

Grainfather

40 L capacity, around 30 L into the fermenter and roughly 9 kg of grain capacity, with a variable-speed recirculation pump and a counterflow chiller in the box. The extra ten liters is what turns a five gallon system into one that can fill a corny keg with headroom or brew a big beer without compromise.

Spec sheet

Capacity
40 L / 10.5 gal
Max batch
~30 L / 8 gal into the fermenter
Control
Bluetooth app, programmable step mash
Pump
Variable-speed recirculation pump
Chiller
Counterflow wort chiller included
Grain capacity
~9 kg / 20 lb

What it is not good at

It is physically larger and heavier, which matters in a kitchen, and the extra capacity does nothing at all if you brew five gallon batches. Buying it for the grain capacity you might need one day is the expensive version of this decision.

Who it is for

Six to eight gallon batches and heavier grain bills

Electric single-vessel brewing kettle with a digital controller

Mid tier

BrewZilla Gen 4.1 35 L

KegLand

A 35 L vessel that lands between the two Grainfathers on capacity, with RAPT wifi, programmable step mash, a built-in pump and a counterflow chiller included. The value alternative if the Grainfather ecosystem is not the deciding factor.

Spec sheet

Capacity
35 L / 9.2 gal
Power
110V 1600W / 220V 2500W (region dependent)
Connectivity
RAPT wifi, step mash, delay timer
Pump
Built-in magnetic drive, easy-access base
Base
Fully concave draining base
Included
Counterflow chiller, grain basket

What it is not good at

Power ratings are region dependent and the concave base and pump need careful cleaning. Support and parts availability are not the same as Grainfather's.

Who it is for

The same idea at lower cost, with wifi control

FAQ

Questions brewers actually ask

What is the difference between the Grainfather G30 and G40?

Capacity. The G30 holds 30 L and delivers about 23 L into the fermenter; the G40 holds 40 L and delivers about 30 L, with roughly 9 kg of grain capacity and a variable-speed pump. The control app, the recirculating process and the build are otherwise the same idea in two sizes.

Can the Grainfather G30 brew a five gallon batch?

Yes -- that is exactly what it is sized for. About 23 L into the fermenter is a standard five gallon batch with the losses accounted for. Where it runs short is high gravity recipes, where the grain bill crowds the basket before the kettle runs out of room.

Is the G40 worth the extra over the G30?

Only if you will use the volume. For six to eight gallon batches or big grain bills it removes a real constraint. For five gallon brewing it adds size, weight and cost without changing the beer, and the G30 is the better purchase.

Does the Grainfather G40 come with a chiller?

Yes, a counterflow wort chiller is part of the system, along with the variable-speed recirculation pump. That is worth factoring into any price comparison against systems that sell the chiller separately.

How much grain fits in a Grainfather G40?

Around 9 kg, roughly 20 lb, according to the published specification. That is what makes high gravity recipes straightforward on it -- on smaller single-vessel systems a big grain bill crowds the basket, slows recirculation and costs efficiency.

Sources

Read next

More on brewing systems

Sacks of malted barley in storage

Guide

How to Improve Mash Efficiency

Crush gap, mash pH, water to grist ratio and sparge rate -- what actually moves mash efficiency, in priority order.

View all Brewing Systems →